题目内容

Return lines need not be shown in entirety unless necessary to the understanding of the system.

A. 如果对系统的理解很有必要,就不需要完整地显示回流管。
B. 除非对系统的理解很有必要,否则不需要提前显示回流管。
C. 除非对系统的理解很有必要,否则不需要完整地显示回流管。

查看答案
更多问题

A separate shading pattern to distinguish between supply, pressure, return, etc., shall be used.

A. 应使用不同的图案描影来标记供给、压力、回流等。
B. 应使用不同的图案描影来区分供给、压力、回流等。
C. 应使用不同的图案描影来识别供给、压力、回流等。

The same coding for each individual system shall be used throughout the manual.

A. 在整个手册中,每个独立的系统应使用相同的编码。
B. 在整个手册中,相似的系统应使用相同的编码。
C. 在整个手册中,每个独立的系统应使用相同的编号。

All flow control devices within the system, such as check valves, fuel pumps, accumulators, and relays should be included.

A. 应包括系统内的所有流量控制装置,如检查活门、燃油泵、变压器和继电器。
B. 应包括系统内的所有流量控制装置,如单向活门、燃油泵、储压器和继电器。
C. 应包括系统内的所有流量控制设备,如单向活门、燃油泵、储压器和继电器。

Solenoid valves shall be indicated as such and shall include a notation indicating whether the valve is spring-loaded to the open or closed position.

A. 电磁活门应显示为这样,并应包括一个符号,指示活门是压力加载到打开位置还是关闭位置。
B. 电磁活门应显示为这样,并应包括一个提示,指示活门是弹簧加载到打开位置还是关闭位置。
C. 电磁活门应显示为这样,并应包括一个符号,指示活门是弹簧加载到打开位置还是关闭位置。

答案查题题库