RS-232标准在初期可以满足人们的要求,但当人们要求以更高的速率传送到更远的距离时,需要有新的标准,RS-449就可以实现这个目的。它的标准规格中,RS-422标准是平衡式的,传输一个信号用两条线,逻辑信号的表示用 (1) ,双线传输的好处是 (2) 。 X.21的接口是 (3) 之间的接口,为兼容RS-232设备,制定了 (4) 。X.21接口每根线上可以 (5) 。 3()
A. Modem和计算机
B. Modem和电话线
C. 计算机和数字化端接设备
D. 计算机和电话线
Linux系统的路由配置中,若设置静态路由,则需要 (1) 命令。在使用该命令时为了防止出现错误,可以用网络名字代替网络号,而网络名字可以在文件 (2) 中定义。为了将手工配置的命令存储下来,在系统启动时自动执行,可以通过 (3) 来实现。若运行动态路由,则 (4) 守护进程只支持RIP路由协议,而支持更多路由协议的进程运行时需要配置文件 (5) 。 3()
A. /etc/autoexec
B. /dev/autoexec
C. /etc/rc.d/rcinet1和/etc/rc.d/rc.inet2
D. /ete/rc.inet1和/etc/rc.inet2
For each blank, choose the best answer from the four choices and write down on the answer sheet.(1) is a one-way function that takes an arbitrarily long piece of plaintext and from it computes a fixed-length bit string.(2) is a protocol that most USENET machines now use it to allow news articles to propagate from one machine to another over a reliable connection.(3) is an approach preferred by cable TV providers. In this solution the fiber terminates at an optoelectrical converter and the final segment is a shared coaxial cable.(4) is a device used to connect two separate network that use different communication protocol.(5) is a digital-to-digital polar encoding method in which the signal level is always either positive or negative. 5()
A. NNI
B. NRZ
C. NAK
D. NVT
Linux系统的路由配置中,若设置静态路由,则需要 (1) 命令。在使用该命令时为了防止出现错误,可以用网络名字代替网络号,而网络名字可以在文件 (2) 中定义。为了将手工配置的命令存储下来,在系统启动时自动执行,可以通过 (3) 来实现。若运行动态路由,则 (4) 守护进程只支持RIP路由协议,而支持更多路由协议的进程运行时需要配置文件 (5) 。 4()
A. route
B. routed
C. rip
D. gate